大量批零Primer 702冷凝剂
PRIMER 702 DATA SHEET
DESCRIPTION
Primer 702 is a solvent-based accelerator designed to speed the cure of
Henven Cyanoacrylate Adhesive.
APPLICATIONS
Primer 702 is a single component non-CFC solvent based Cyanoacrylate
adhesive accelerator, this product is formulated for promoting the speed
of cure of Henven Cyanoacrylate Adhesive. It is suitable for per-or-post
-applied to bond Securing wires or coils to PCBs tamper-proofing adjustable
components. Mounting standoffs, edge guides and board stiffeners.
PROPERTIES
Fast drying Primer 702 is a blend of flammable solvents.
Care must be taken to avoid naked flames. Prmier 702 has the ability to
reduce odors and blooming but excessive deposits will increase blooming
due to rapid polymerization.
INTRODUCTIONS FOR USE
Ensure parts are clean, dry and free from oil and grease.
Primer 702 can be use to speed cure by brushing or spraying onto the surface,
applying drop wise, and the superglue and then over spraying to cure
fillets such as on a wire tacking jobs
MULTI PURPOSE CA'S ACCELERATOR
For surface and speed cure of all types of Cyanoacrylate Adhesive.
PRODUCT APPEARANCE
Carrier Solvent Heptanes
Color Yellowish liquid
Cure Speed V. Fast, Usual<10 sec
Viscosity < 5 cps
Gap Fill Thick super glues
Flash point -4 ℃
Specific Gravity 0.684
CURE PERFORMANCE
Performance is dependent on the adhesive viscosity. Low viscosity gets
quicker setting and the setting time for higher viscosity<10 seconds.
For gels type Cyanoacrylate Adhesive, dependent on the techniques
always not more than 30 seconds.
STORAGE
Store in a cool area out of direct sunlight. See safety instructions on the
flammable grade
备注： 此型号为喷雾型固化剂，200ml/瓶，一箱12瓶。 |
 |
|
|
手机站
您当前位置是：商业机会 >> 化工 >> 催化剂 >> 供应Primer702固化剂
联系信息