除日常性保养各项目外,重点应检查各部件的磨损情况
In addition to the daily maintenance items, the emphasis should be given to the inspection of the wear conditions of the components.
1、检查上、下机架、主机底盘、上料皮带机、限位开关等部位的联接螺栓是否有松动现象,各脚板是否有松动,基础是否下沉.
1, check whether the connecting bolts on the upper and lower rack, main chassis, loading belt conveyor, limit switch and other parts are loose, whether the footboards are loose or not, and whether the foundation sinks.
2、检查衬板、叶片磨损情况,有松动、开裂、磨去1/2等情况时,应及时更换;叶片与拌筒间间隙过大,则调整至3-8mm.
2, check the lining plate, blade wear, loose, cracking, abrasion 1/2 etc., should be replaced; and the drum blade between the gap is too large, it is adjusted to 3-8mm.
3、检查各减速机内润滑油情况,按常规方法及配套件说明书更换润滑油.
3. Check the lubricating oil in each reducer and replace the lubricating oil according to the routine method and the instructions of the supporting parts.
4、检查皮带的磨损情况(一般情况下,皮带可使用达到12个月以上),若有磨损严重则及时更换新带,其长度见易损件清单.
4, check the wear condition of the belt. (usually, the belt can be used for more than 12 months). If there is serious wear, the new belt will be replaced in time. The length of the belt can be seen on the list of vulnerable parts.
5、检查各骨料仓底部开门板的磨损情况,若磨损严重,如穿孔、漏料,则及时更换新门板,现场焊上.
5. Check the wear of the bottom plate of the aggregate barn. If the wear is serious, such as perforation and leakage, the new door plate is replaced in time, and the spot is welded on the spot.
6、拆卸粉料斗的蝶阀,清理干净内杂物并检查内部橡胶板是否有损坏.
6, remove the butterfly valve of the powder hopper, clean up the sundries and check whether the internal rubber plate is damaged.
公司名称：济南笨鸟先飞自流平服务中心
联系人：腾师傅
联系电话1：18560146326
联系电话2：13688634565
固定电话：0531-58969192
地址：济南市各地均可服务
诺商基于多年的优化经验和品牌基础推出的诺商商道系统，诺商信息您身边的互联网专家！ |
免责声明：以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，www.qy6.com对此不承担任何责任。如有侵犯您的权益，请来信通知删除。