Product name 3D printing paste
State Paste
Packing 25KG/drum for white, 20KG/drum for clear
Storage 6 months in cool place
Application Suitable for cotton, polyester etc
Features 1. High elasticity
2. High fastness
3. SGS detecting passed, no PVC, no heavy metal, no NPEOs
Mix proportion Light: White printing paste 70-80% + Clear printing paste 20-30% + pigment ?%
Deep: White printing paste 20-30% + Clear printing paste 70-80% + pigment ?%
Printing process 1. Printing with clear printing paste for 2-3 times
2. Mixing with white printing paste, clear printing paste, pigment and stirring them evenly.
3. Printing again for 3-4 times (3-4 scrapes per time).
4. Drying it in room temperature, or baking for 1-3 minutes under 150-180℃
5. Finish.
Attentions
品名 水性厚板浆
外观 糊状
包装 白胶浆25KG/桶，透明浆20KG/桶
贮存期 常温下6个月
应用 针织布
卖点 1. 手感柔软
2. 高牢度耐水洗
3. 符合美国ASTM对邻苯二甲酸脂和欧盟EN71 Part 3对重金属含量的要求
调配比例 印浅色：白胶浆70-80% + 透明浆20-30% + 色种？%
印深色：白胶浆20-30% + 透明浆70-80% + 色种？%
工艺流程 1. 丝网选用80-100目厚板，用丝印硬方刀75度刮印, 以透明浆打底2-3次
2. 将白胶浆，透明浆，色种搅拌匀印2-3次
3. 24-48小时自然干燥，或150-180度焙烘1-3分钟 |
 |
|
|
手机站
您当前位置是：产品大全 >> 化工 >>
其他树脂
免责声明：以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，www.qy6.com对此不承担任何责任。如有侵犯您的权益，请来信通知删除。
联系信息