类型： 膜片压力表 联接型式： G1/2
型号： PGT43HP.100 PGT43HP.160 精度等级： 1.6
品牌： WIKA/威卡 环境温度： -40-70（℃）
加工定制： 是 公称直径： 100 160（mm）
测量范围： 0 ... 16 mbar to 0 ... 250 mbar（MPa）
WIKA PGT43HP.100 160
全钢安全型带过压保护膜片式电接点压力表
Diaphragm pressure gauge with electrical output signal
Stainless steel, safety version
High overpressure safety up to 400 bar
Models PGT43HP.100 and PGT43HP.160
Diaphragm pressure gauge model PGT43HP.100
Applications
Acquisition and display of process values
Transmission of process values to the control room, 4 ... 20 mA, 0 ... 20 mA, 0 ... 10 V
For measuring points with increased overpressure of 40, 100 or 400 bar
Easy-to-read, analogue on-site display needing no external power
Safety-related applications
Special features
"Plug-and-play" with no configuration necessary
Measuring ranges from 0 ... 16 mbar
Wide choice of special materials
For gaseous, liquid and aggressive media, also in aggressive ambience, due to all stainless steel construction
Safety pressure gauge S3 per EN 837
Description
At any point where the process pressure has to be indicated locally, and, at the same time, a signal is wanted to be transmitted to a central controller or remote control room, the model PGT43HP intelliGAUGE (US Patent No. 8,030,990) can be used.
Due to the metallic construction of the pressure elements, these instruments have a high overpressure safety in the ranges of 40, 100 and 400 bar.
Through the combination of a high-quality mechanical measuring system and precise electronic signal processing, the process pressure can be read securely, even if the power supply is lost. The intelliGAUGE model PGT43HP fulfils all safety-related requirements of the relevant standards and regulations for the on-site display of the operating pressure of pressure vessels. An additional measuring point for mechanical pressure indication can thus be saved.
The model PGT43HP is based upon a model 432.36 highquality, stainless steel safety pressure gauge with a nominalsize of 100 or 160. The pressure gauge is manufactured in accordance with EN 837-3.
The rugged design of the diaphragm measuring systemproduces a pointer rotation proportional to the pressure. An electronic angle encoder, proven in safety-critical automotive applications, determines the position of the pointer shaft - it is a non-contact sensor and therefore completely free from wear and friction. From this, the electrical output signal proportional to the pressure, e.g. 4 ... 20 mA, is produced.
The electronic WIKA transmitter, integrated into the high-quality mechanical pressure gauge, combines the advantages of electrical signal transmission with the
advantages of a local mechanical display.
The measuring span (electrical output signal) is set automatically along with the mechanical display, i.e. the scale over the full display range corresponds to 4 ... 20 mA. The electrical zero point can also be set manually.
Standard version
Nominal size in mm
100, 160
Accuracy class
1.6
Scale range
0 ... 16 mbar to 0 ... 250 mbar
0 ... 400 mbar to 0 ... 40 bar or all other equivalent vacuum or combined pressure and vacuum ranges
Overpressure safety
40, 100 or 400 bar
Process connection with lower measuring flange
Stainless steel 316L, G ½ B (male), 22 mm flats
欢迎致电咨询订购WIKA PGT43HP.100 160 全钢安全型带过压保护膜片式电接点压力表
电话:010-51669912 56291930 15910733293
传真：010-51669912
QQ：823377546 1491421115 2636968574
邮箱：sales@zoriver.cn
公司官网：http://www.zoriver.cn http://www.zoriver.com.cn |
 |
|
|
手机站
您当前位置是：产品大全 >> 仪器仪表 >>
压力仪表
免责声明：以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，www.qy6.com对此不承担任何责任。如有侵犯您的权益，请来信通知删除。
联系信息