原装进口松下底填胶CV5300AK01EPS耐高温芯片倒装底填胶
Liquid encapsulant materials
CV5300AK
TECHNICAL INFORMATION
Encapsulation Materials Department Plastic Materials Business Unit Electronic Materials Business Division
Panasonic Industory Co., Ltd
This is one component epoxy for Flip-chip underfilling.
TYPICAL PROPERTIES
Properties Unit Data Test Method
Viscosity(25oC) Pa*s 20 KES-B-0102
Gelation time sec 800 EKS-B-1051
RECOMMENDING PREHEAT CONDITION
temperature of substrate : 80～120oC
temperature of syringe : R.T.～ 60oC
TYPICAL CURED PROPERTIES
Measurement Cure Conditions : 100'C2hour + 150`C 2hour
Treatment Conditions
(A):PCT with 10% water for 20hrs resin was cured and crushed
※Typical data
ATTENTION TO STORAGE
・Stored compound must be thawed before use. Warm at room temperature until no longer cool to touch (about 2hrs).
・Please use up the material within 12 hrs.
・Compound must be stored in the cool condition with sealing.
・Please keep material under -40oC after receiving product.
ATTENTION TO HANDLING
・Please avoid direct contact with this product by wearing gloves, protecting gears,etc.
・Prevent frequent skin contact. If contact occurs, wash immediately with soap and water.
原装进口松下底填胶CV5300AK01EPS耐高温芯片倒装底填胶
上海金泰诺材料科技有限 |
 |
|
|
手机站
您当前位置是：产品大全 >> 精细化工 >>
合成胶粘剂
免责声明：以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，www.qy6.com对此不承担任何责任。如有侵犯您的权益，请来信通知删除。
联系信息
