产品描述
GYTA53/GYTS53 光缆的结构是将单模或多模光纤套入由高模量的聚酯材料做成的松套管中，套管内填充防水化合物。缆芯的中心是一根金属加强芯，对于某些芯数的光缆来说，金属加强芯外还需挤上一层聚乙烯 (PE) 。松套管 ( 和填充绳 ) 围绕中心加强芯绞合成紧凑的圆形缆芯，缆芯内的缝隙充以阻水填充物。涂塑铝带 (APL) 纵包后挤一层聚乙烯内护套，双面键铬涂塑钢带 (PSP )纵包后挤制聚乙烯外套成缆。
GYTA53/GYTS53 cable structure is the single mode or multimode fiber into the loose tube made of high modulus
polyester material, the casing filled with waterproof compound. The core of the cable core is a metal core, for some
of the core number of optical cable, the metal to strengthen the core need to squeeze a layer of polyethylene (PE).
Loose tube (and filled rope) around the center to strengthen the core of the core to strengthen the synthesis of com-
pact circular core cable, the core of the gap filled with water to fill the water filled. The coated aluminum with a a
(APL) is longitudinally covered squeeze a layer of polyethylene sheath, double chrome coated strip (PSP) is longitu-
dinally covered after extrusion of polyethylene jacket cable.
产品特点
精确控制的光纤余长保证了光缆具有良好的抗拉性能和温度特性松套管材料本身具有良好的耐水解性能和较高的强度管内充以特种油膏,对光纤提供了关键性保护良好的抗侧压性和柔软性采用下列
措施来确保光缆的防水性能：
单根钢丝中心加强芯。
松套管内填充特种防水化合物。
完全缆芯填充。
涂塑铝带 (APL) 防潮层。
Precise control of fiber excess length to ensure the cable has good tensile properties and temperature characteris-
tics of loose tube material itself has good resistance to hydrolysis resistance and high strength tube filled with spe-
cial cream, the fiber provides critical protection good lateral pressure resistance and softness of the measures to
ensure the cable waterproof performance:
a single wire center strengthening core.
Special waterproof compound filled with loose tube.
Full cable core filling.
coated aluminium (APL) moistureproof layer |
 |
|
|
手机站
您当前位置是：产品大全 >> 电工电气 >>
广电、电信设备
免责声明：以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，www.qy6.com对此不承担任何责任。如有侵犯您的权益，请来信通知删除。
联系信息
