>> PC228高灵敏度全极性微功耗霍尔开关
The LH228 Omnipolar Hall effect sensor IC is fabricated from mixed signal CMOS technology .It incorporates advanced chopper-stabilization techniques to provide accurate and stable magnetic switch points.
The circuit design provides an internally controlled clocking mechanism to cycle power to the Hall element and analog signal processing circuits. This serves to place the high current-consuming portions of the circuit into a “Sleep” mode. Periodically the device is “Awakened” by this internal logic and the magnetic flux from the Hall element is evaluated against the predefined thresholds. If the flux density is above or below the Bop/Brp thresholds then the output transistor is driven to change states accordingly. While in the “Sleep” cycle the output transistor is latched in its previous state. The design has been optimized for service in applications requiring extended operating lifetime in battery powered systems.
The output transistor of the LH228 w ill be latched on (Bop) in the presence of a sufficiently strong South or North magnetic field facing the marked side of the package. The output will be latched off (Brp) in the absence of a magnetic field.
>> 产品特性及优点
Micropower consumption for battery powered applications
Omnipolar, output switches with absolute value of
North or South pole from magnet
Operation down to 2.5V
High sensitivity for direct reed switch replacement applications
>> 产品应用领域
Solid state switch
Handheld Wireless Handset Awake Switch Lid close sensor for battery powered devices
Magnet proximity sensor for reed switch replacement in low duty cycle application |
 |
|
手机站
您当前位置是：产品大全 >> 电子元器件 >>
传感器、敏感元器件
免责声明：以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，www.qy6.com对此不承担任何责任。如有侵犯您的权益，请来信通知删除。
联系信息
