企业录,供求信息免费发布平台
 
  首 页 企业名录 产品大全 商业机会 企业建站 我的办公室
手机站
您当前位置是:产品大全 >> 电子元器件 >> 集成电路(IC)
STM32F103RGT6/STM32F031K6U6 托盘 STM32F103RGT6/STM32F031K6U6 托盘//STM32F103RGT6/STM32F031K6U6 托盘

浏览大图
公 司: 誉诚(深圳)实业科技有限公司 
发布时间:2020年11月19日
联系人:朱小姐 女士 加为商友
留言询价
  联系信息 企业信息
朱小姐 女士 (销售)
联系时,请说是在企业录看到的,谢谢!
电  话: 0755-29309513
传  真: 0755-29309513
手  机: 13560767759
在线联系:
地  址: 中国广东深圳市深圳市前海深港合作区前湾一路1号A栋201室
邮  编:
公司主页: http://siruitegs.qy6.com(加入收藏)
公 司:誉诚(深圳)实业科技有限公司

查看该公司详细资料

详细说明

    Five BOR thresholds are available through option bytes, starting from 1.8 V to 3 V. Toreduce the power consumption in Stop mode, it is possible to automatically switch off theinternal reference voltage (VREFINT) in Stop mode. The device remains in reset mode whenVDD is below a specified threshold, VPOR/PDR or VBOR, without the need for any externalreset circuit.Note:The start-up time at power-on is typically 3.3 ms when BOR is active at power-up, the start-up time at power-on can be decreased down to 1 ms typically for devices with BOR inactiveat power-up.The device features an embedded programmable voltage detector (PVD) that monitors theVDD/VDDA power supply and compares it to the VPVD threshold. This PVD offers 7 differentlevels between 1.85 V and 3.05 V, chosen by software, with a step around 200 mV. Aninterrupt can be generated when VDD/VDDA drops below the VPVD threshold and/or whenVDD/VDDA is higher than the VPVD threshold. The interrupt service routine can then generatea warning message and/or put the MCU into a safe state. The PVD is enabled by software.3.3.3Voltage regulatorThe regulator has three operation modes: main (MR), low power (LPR) and power down.●MR is used in Run mode (nominal regulation)●LPR is used in the Low-power run, Low-power sleep and Stop modes●Power down is used in Standby mode. The regulator output is high impedance, thekernel circuitry is powered down, inducing zero consumption but the contents of theregisters and RAM are lost are lost except for the standby circuitry (wakeup logic,IWDG, RTC, LSI, LSE crystal 32K osc, RCC_CSR).3.3.4Boot modesAt startup, boot pins are used to select one of three boot options:●Boot from Flash memory●Boot from System Memory●Boot from embedded RAMThe boot loader is located in System Memory. It is used to reprogram the Flash memory byusing USART1 or USART2. See STM32™ microcontroller system memory boot modeAN2606 for detail


免责声明:以上所展示的信息由会员自行提供,内容的真实性、准确性和合法性由发布会员负责,www.qy6.com对此不承担任何责任。如有侵犯您的权益,请来信通知删除。
该公司其他产品信息
 1 2 直接到第
47 条信息,当前显示第 1 - 30 条,共 2

机械 仪器 五金 电子 电工 照明 汽摩 物流 包装 印刷 安防 环保 化工 精细化工 橡胶塑料 纺织 冶金 农业 健康保养 建材 能源 服装 工艺品 家居用品 数码 家用电器 通讯产品 办公 运动、休闲 食品 玩具 商务 广告 展会
1 2 3 4 5 6 7 .. 联系人:朱小姐 电话:0755-29309513

关于我们 | 网站指南 | 广告服务 | 诚招代理 | 诚聘英才 | 付款方式 | (企业录)联系方式 | 友情链接 | 网站地图