乐泰 3851电子组装/乐泰 3851电子组装/乐泰 3851电子组装/乐泰 3851电子组装/乐泰 3851电子组装/乐泰 3851电子组装/乐泰 3851电子组装/乐泰 3851电子组装/乐泰 3851电子组装/乐泰 3851电子组装/乐泰 3851电子组装/乐泰 3851电子组装/乐泰 3851电子组装/乐泰 3851电子组装/乐泰 3851电子组装/乐泰 3851电子组装/乐泰 3851电子组装/乐泰 3851电子组装/乐泰 3851电子组装/乐泰 3851电子组装/乐泰 3851电子组装/乐泰 3851电子组装/乐泰 3851电子组装/乐泰 3851电子组装/乐泰 3851电子组装/乐泰 3851电子组装/乐泰 3851电子组装/乐泰 3851电子组装/工业胶水/电子组装胶水/工业用胶
技术服务热线：021-51693135 / 021-22818476
乐泰®
3851™ typical applications include bonding glass to
metal for structural or decorative purposes, particularly where
some parts of the bondline are shaded from UV light.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 1.1
Flash Point - See SDS
Viscosity, Brookfield - RVT, 25 °C, mPa•s (cP):
Spindle 4, speed 20 rpm, 3,000 to 7,000LMS
TYPICAL CURING PERFORMANCE
This product is cured when exposed to UV radiation of 365nm.
To obtain a full cure on surfaces exposed to air, radiation at
250nm is also required. The speed of cure will depend on the
UV intensity as measured at the product surface.
Fixture Time
Fixture time is defined as the time to develop a shear strength
of 0.1 N/mm2.
UV Fixture Time, Glass, seconds:
Medium Pressure Hg Arc bulb, Zeta®
7200 light source:
10 mW/cm2, measured @ 365 nm 9
100 mW/cm2, measured @ 365 nm 6
Fixture Time, ISO 4587, seconds:
Steel (grit blasted), with Activator 7649™ on 2 sides ≤25LMS
Storage
Store product in the unopened container in a dry location. Storage
information may be indicated on the product container labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater
than 28 °C can adversely affect product properties
乐泰®
3851™典型应用包括粘合玻璃
用于结构或装饰用途的金属，特别是在哪里
粘合线的一些部分被紫外线遮蔽。
固 |
 |
|
|
手机站
您当前位置是：产品大全 >> 化工 >>
胶粘剂
免责声明：以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，www.qy6.com对此不承担任何责任。如有侵犯您的权益，请来信通知删除。
10
联系信息
