ECCOSEAL 7200电子组装/ECCOSEAL 7200电子组装/ECCOSEAL 7200电子组装/ECCOSEAL 7200电子组装/ECCOSEAL 7200电子组装/ECCOSEAL 7200电子组装/ECCOSEAL 7200电子组装/ECCOSEAL 7200电子组装/ECCOSEAL 7200电子组装/ECCOSEAL 7200电子组装/ECCOSEAL 7200电子组装/ECCOSEAL 7200电子组装/ECCOSEAL 7200电子组装/ECCOSEAL 7200电子组装/ECCOSEAL 7200电子组装/ECCOSEAL 7200电子组装/ECCOSEAL 7200电子组装/ECCOSEAL 7200电子组装/ECCOSEAL 7200电子组装/ECCOSEAL 7200电子组装/ECCOSEAL 7200电子组装/ECCOSEAL 7200电子组装/ECCOSEAL 7200电子组装/ECCOSEAL 7200电子组装/ECCOSEAL 7200电子组装/ECCOSEAL 7200电子组装/ECCOSEAL 7200电子组装/ECCOSEAL 7200电子组装/ECCOSEAL 7200电子组装/ECCOSEAL 7200电子组装/ECCOSEAL 7200电子组装/工业胶水/电子组装胶水/工业用胶
技术服务热线：021-51693135 / 021-22818476
ECCOSEAL 7200 adhesive sealant is designed for high
throughput display assembly for displays that require
protection against humidity and oxygen.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Viscosity at 25°C, mPa•s (cP)
(Plate 2 cm at 1.5 s
-1 )
2,000 to
2,700
Flow Rate @ 25°C, seconds:
10 mm distance between Glass and PET
at 250μm thick
<250
Particle Size, μm, maximum 120
Particle Size, μm, typical 50 to 60
Pot Life @ 25oC, hours 12
Shelf Life @ -40°C, months 6
Flash Point - See MSDS
TYPICAL CURING PERFORMANCE
Cure Schedule
Convection:
30 minutes @ 70°C or
15 minutes @ 80°C or
7 minutes @ 100°C
Time shown does not include ramp-up time to cure temperaure.
After cure, the material is best left at room temperature for 24 hoursbefore starting any evaluation
The above cure profiles are guideline recommendations. Cureconditions (time and temperature) may vary based oncustomers' experience and their application requirements, aswell as customer curing equipment, oven loading and actualoven temperatures. Storage Store product in the unopened container in a dry location.Storage information may be indicated on the product containerlabeling.Optimal Storage: -40 °C
ECCOSEAL 7200胶粘剂专为高要求的显示器的吞吐量显示组件防止潮湿和氧气。
固化材料的典型特性
25℃下的粘度，mPa̶ |
 |
|
|
手机站
您当前位置是：产品大全 >> 化工 >>
胶粘剂
免责声明：以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，www.qy6.com对此不承担任何责任。如有侵犯您的权益，请来信通知删除。
10
联系信息
