乐泰 3106电子组装/乐泰 3106电子组装/乐泰 3106电子组装/乐泰 3106电子组装/乐泰 3106电子组装/乐泰 3106电子组装/乐泰 3106电子组装/乐泰 3106电子组装/乐泰 3106电子组装/乐泰 3106电子组装/乐泰 3106电子组装/乐泰 3106电子组装/乐泰 3106电子组装/乐泰 3106电子组装/乐泰 3106电子组装/乐泰 3106电子组装/乐泰 3106电子组装/乐泰 3106电子组装 工业胶水/电子组装胶水/工业用胶
技术服务热线：021-51693135 / 021-22818476
乐泰®3106™ is primarily designed for bonding rigid or flexible PVC to polycarbonate where large gap filling capabilities and flexible joints are desired. The product has shown excellent adhesion to a wide variety of substrates including glass, many plastics and most metals.
The thixotropicnature of 乐泰®3106™ reduces the migration of liquid product after application to the substrate. TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 1.08Refractive Index 1.48Flash Point - See MSDSViscosity, Brookfield - RVT, 25 °C, mPa•s (cP):Spindle 4, speed 20 rpm 3,500 to 7,500LMSTYPICAL CURING PERFORMANCE乐泰®3106™ can be cured by exposure to UV and/or visible light of sufficient intensity. To obtain full cure on surfaces exposed to air, radiation @ 220 to 260 nm is also required. The speed of cure will depend upon the UV intensity and spectral distribution of the light source, the exposure time and the light transmittance of the substrates.
Stress Cracking Liquid adhesive is applied to a polycarbonate bar 6.4 cm by13 mm by 3 mm which is then flexed to induce a known stress level.
Stress Cracking, ASTM D 3929, minutes:7 N/mm2 stress on bar >1512 N/mm2 stress on bar 13 to 14 Storage.
Store product in the unopened container in a dry location.
Storage information may be indicated on the product containerlabeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties.
乐泰®3106™主要设计用于将刚性或柔性PVC粘合到具有大间隙填充的聚碳酸酯中能力和柔性接头是理想的。
该产品具有优异的粘附性，适用于各种基材，包括 |
 |
|
|
手机站
您当前位置是：产品大全 >> 化工 >>
胶粘剂
免责声明：以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，www.qy6.com对此不承担任何责任。如有侵犯您的权益，请来信通知删除。
10
联系信息
