汉高汉高乐泰乐泰 贴片红胶Chipbond 3619
技术服务热线：021-51693135 / 021-22818476
乐泰 3619
3619™ is designed for the bonding of surface mounted devices to printed circuit boards prior to wave soldering. Particularly suited where low curing temperatures are required with heat sensitive components, and in applications where short curing times are required.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 1.22
Yield Point, 25 °C, Pa
Cone & Plate Rheometer:
Haake PK 100, M10/PK 1 2° Cone
200 to 450LMS
Casson Viscosity @ 25 °C, Pa∙s
Cone & Plate Rheometer:
Haake PK 100, M10/PK 1 2° Cone
1 to 4
Particle Size, μm <100
Flash Point - See MSDS
VISCOSITY VS. TEMPERATURE
The following graph shows a typical temperature-viscosity curve as measured using a Haake rotoviscometer PK100, M10/PK1 2° Cone system at a shear rate of 2 s -1 which is representative of the shear rate in the dispense nozzle. Increased cabin or nozzle temperature in the 30°C to 35°C range may aid dispense performance at higher dispense speeds.
TYPICAL PROPERTIES OF CURED MATERIAL
Cured for 30 minutes @ 100 °C
Physical Properties:
Coefficient of Thermal Expansion,
ISO 11359-2, K
-1:
Temperature Range: -30 °C to +30 °C 60
Temperature Range: 70 °C to 150 °C 120
Density, BS 5350-B1 @ 25 °C, g/cm3 1.3
Glass Transition Temperature, ASTM D 4065, °C 50
Electrical Properties:
Volume Resistivity, IEC 60093, Ω·cm 1.2×1015
Surface Resistivity, IEC 60093, Ω 19×1015
Electrolytic Corrosion, DIN 53489 A - 1
Dielectric Breakdown Strength,
IEC 60243-1, kV/mm
30
Dielectric Constant / Dissipation Factor, IEC 60250:
1-kHz 3.24 / 0.02
100-kHz 3.05 / 0.03
1,000-kHz 2.89 / 0.04
10,000-kHz 2.75 / 0.05
Surface Insulation Resistance, Ω:
IPC TM 650 2.6.3.1:
Test Board: IPC-B-25A, comb pattern D:
Initial 200×109
Aged for 7 days @ 50 °C, 90 % RH 550×10
乐泰3619
3619™是专为表面粘接安装设备的印刷电路板波峰焊 |
 |
|
|
手机站
您当前位置是：产品大全 >> 化工 >>
胶粘剂
免责声明：以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，www.qy6.com对此不承担任何责任。如有侵犯您的权益，请来信通知删除。
10
联系信息
