Description
It is a mobile grease pump which can install on a trolley. And it is suitable for 10-30kg barreled oil, you can put the oil with the drum into it. Also we can pure the bulk oil into it directly.
NOTE:
We should fit out the 60:1 pneumatic pump, the 4m hose, and the turnable grease gun. It is an air supply device and controlled by pneumatic component which is steady, effective and widely supplied.
Techniques
Tank capacity： 40L
Pump raito： 60:1
Delivery： 500-900g/min
Hose： 4m
Air pressure： 4-8Kg/cm2
Delivery pressure: 480 Kg/cm2
Net weight: 21.0 Kgs
Gross weight： 23.5 Kgs
Applications
1 , it can be applied to bulk grease or 12-30L(under25L)Barreled oil;
2 , it can delivery the 0#~3#grease fluently;
3 , there is a follower plate which can be applied to a standared drum, if there is an anomalistic one you should illuminate other way.
It can be applied to industries like the gas station, the working line, the paper making, eletricity, electron, port, construction machine, automobile, etc, is a perfect device for developing the machine's quality.
Example
Buying direction
It will be better to choose an exellent injector according to the viscosity and the article of the grease and the diameter of the drum. It can help you save your grease consumption also let the pump be more effective.
产品描述】
移动式黄油加注机， 此机装在小车上，可将10-30公斤油桶整个放入桶内、也可将散装油倒入桶内。
加注机配有1个60：1的强力泵、4米高压油管、可旋转高压黄油加注枪。该装置以气源为动力，由气动元件控制，性能稳定、快速注脂、适用范围广泛等特点。
【技术参数】
罐体容量： 40L
压 力 比： 60:1
输 出 量： 500-900g/分钟
油管长度： 4米
气源压力： 4-8Kg/cm2
黃油输出压力：180-480 Kg/cm2
净 重： 21.0 Kgs
毛 重： 23.5 Kgs
【使用范围】
1 , 适用于散装或12-30公斤(25L以下)桶装黄油
2 , 0#~3#黃油均能順畅注入，
3 , 标准配置有加重型压力板（适用于25L以下标准油桶）；非标准油桶请另行指明。
适用于换油中心,车间生产线、冶金, 造纸, 电子, 电力, 港口、工程机械、汽车、机械设备、轮船农用车辆等场合润滑油脂的润滑输送和加注。也广泛用于汽车零部件行业中门锁、制动器、雨刮器、座椅导轨等工艺加脂，轴承行业中压盖前加脂，微型电机行业装配线的减速齿轮工艺加脂,电动工具行业中齿轮副装配加脂。是企业提高产品装配质量的必备手段。
【图 示】
【选型指南】
在选购时，应根据黄油的品种、粘度、桶内尺寸选择合适的产品，节省开支，以获得*佳使用量，同时
增加泵的用处。对于特高粘度的黄油，应根据季节、使用地区地理环境等选择适宜的油桶型号及加注机。 |
 |
|
|
手机站
您当前位置是：商业机会 >> 汽摩及配件 >> 防护保养品 >> 供应Grease Pump(K55)气动黄油机
联系信息