Sorensen / Elgar / Xantrex 600V 1.7A Programmable 1kW DC Power Supply, model number DCS600-1.7 (predecessor to dcs600-1.7e). Used. Output voltage and current adjustable from 0 to 600V and 1.7A, respectively.
Wired for 240VAC input. By adjusting an internal jumper, the supply can be easily rewired to accept 120VAC input.
Please see the product manual (available on the manufacturer's web page) for details.
Manufacturer's Description:
The DCS Family of 1 kW, 1.2 kW and 3 kW programmable power supplies incorporate current mode switching rates up to 100 kHz in high power density, low profile chassis. Utilizing unique packaging techniques, the DCS Family provides continuous full output power (1 kW, 1.2 kW or 3 kW) in any volt/amp combination within the rated output voltage and current limits.
This family has 10-turn potentiometers to adjust voltage and current settings that are displayed simultaneously. LEDs indicate overtemperature, remote programming, shutdown and overvoltage protection, status and constant-voltage/current mode operation.
Regulation (Line or Load)
Voltage: 0.1%
Current: 0.1%
Transient Response:
Typically recovers in <1 ms to 1% of steady-state output voltage (within 1% of Vmax) for 70-100% or 100-70% load change. 500 µs typical
Stability:
±0.05% of maximum voltage or current over 8 hours after 30 minute warm-up time at fixed line, load and temperature
Meter Accuracy: 1% of full scale + 1 count
Dimensions:
1.75" (44 mm) H x 19" (482 mm) W x 17.5" (444 mm) D
Weight
19 lbs. ( 8.62 kg) |
您当前位置是：华企网首页 >> 商业机会 >> 电子电工 >> 开关电源 >> DCS600-1.7DC Power Supply
回到页首
联系信息