乐泰 5810F电子组装/乐泰 5810F电子组装/乐泰 5810F电子组装/乐泰 5810F电子组装/乐泰 5810F电子组装/乐泰 5810F电子组装/乐泰 5810F电子组装/乐泰 5810F电子组装/乐泰 5810F电子组装/乐泰 5810F电子组装/乐泰 5810F电子组装/乐泰 5810F电子组装/乐泰 5810F电子组装/乐泰 5810F电子组装/乐泰 5810F电子组装/乐泰 5810F电子组装/乐泰 5810F电子组装/乐泰 5810F电子组装/乐泰 5810F电子组装/乐泰 5810F电子组装/乐泰 5810F电子组装/乐泰 5810F电子组装/乐泰 5810F电子组装/乐泰 5810F电子组装/乐泰 5810F电子组装/乐泰 5810F电子组装/工业胶水/电子组装胶水/工业用胶
技术服务热线：021-51693135 / 021-22818476
乐泰®5810F™ is a single component, non-silicone,
oxime-free, polyacrylate based adhesive/sealant that cures
with moisture at room temperature. It is designed with a heavy
body viscosity for on line, low air pressure tests to be carried
out before product begins to cure. The non-silicone based resin
does not promote foaming in lubricants and exhibits excellent
resistance to powertrain fluids. 乐泰®
5810F™ is primarily
designed for flange sealing with excellent oil resistance.
Typical applications include cast metal, stamped steel, and
molded plastic covers for engines, transmissions and axles.
This product also works well for sealing plastic and metal
housings on electronic components.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 20 °C 1.25 to 1.45
Flash Point - See MSDS
Extrusion Rate, g/min:
Pressure 0.6 MPa, temperature 25 °C:
Semco Cartridge 25 to 85
Blow Out Resistance, seconds:
6 mm Flange, 1.0 mm Gap @ 0.014 MPa 10
Storage
Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or
greater than 28 °C can adversely affect product properties. 乐泰®
5810F™是单组分，非硅胶，
无肟，聚丙烯酸酯基粘合剂/密封剂固化
在室温下保持水分。它设计有一个沉重的
体内粘度在线，低气压试验要携带
在产 |
免责声明：以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，www.qy6.com对此不承担任何责任。如有侵犯您的权益，请来信通知删除。