HYSOL US2350电子组装/HYSOL US2350电子组装/HYSOL US2350电子组装/HYSOL US2350电子组装/HYSOL US2350电子组装/HYSOL US2350电子组装/HYSOL US2350电子组装/HYSOL US2350电子组装/HYSOL US2350电子组装/HYSOL US2350电子组装/HYSOL US2350电子组装/HYSOL US2350电子组装/HYSOL US2350电子组装/HYSOL US2350电子组装/HYSOL US2350电子组装/HYSOL US2350电子组装/工业胶水/电子组装胶水/工业用胶
技术服务热线：021-51693135 / 021-22818476
HYSOL® US2350 is a flexible, flame retardant, mineral filled,
polyurethane compound. This potting compound has long pot
life, and is low viscosity so it flows well and adheres to many
substrates. It has very low odor and does not contain TDI or
mercury compounds.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Part A Properties
Density, @ 23 °C, g/cm3 1.24
Viscosity, Brookfield - RVF, cP:
Spindle 2, speed 20 rpm 55
Part B Properties
Density, @ 23 °C, g/cm3 1.46
Viscosity, Brookfield - RVF, cP:
Spindle 5, speed 20 rpm 13,000
Mixed Properties
Working Time, 300 gm mass @ 23 °C, minutes 45
Gel Time, 300 gm mass @ 23 °C, minutes 90
Techne Gel, 140 gm mass, minutes 103
Viscosity, Brookfield - RVF, 23 °C, mPa•s (cP):
Spindle 2, speed 20 rpm 2,400
TYPICAL CURING PERFORMANCE
Recommended Curing Conditions
12 to 24 hours @ 23 °C (Recommended cure)
1 to 3 hours @ 23 °C (Alternate cure)
Storage
Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
labeling.
Liquid Storage - Liquids should be stored at 23°C or
below, in closed containers. If stored below 23°C, the
material MUST be allowed to come to room temperature, in
the sealed container, to avoid moisture contamination. HYSOL®
US2350是一种柔性，阻燃，矿物填充，
聚氨酯化合物。这种灌封料长锅
寿命低，粘度低，因此流动良好，粘附于许多
底物。它具有非常低的气味，不含TDI或
汞化合物。
固化材料的典型特性
部分A属性
密度，@ 23℃，g / cm 3 1.24
粘度，Brookfield - RVF，cP：
主轴2，转速20转55
B部分属性
密度，@ 23℃，g / cm 3 1.46
粘度，Brookfield |
免责声明：以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，www.qy6.com对此不承担任何责任。如有侵犯您的权益，请来信通知删除。