以前新车为什么要磨合1：让发动机、变速器的各齿轮进行磨合，以达到*佳的工作状况；2：让刹车系统充分磨合，以达到*佳的工作状况；3：让车主与新车进行磨合，熟悉车辆性能，减少事故发生；总结起来就是，新车磨合就是为了消除零部件在制造过程中出现的几何偏差，让零件配合更完美，性能达到*佳。如今，汽车制造工艺及零件加工精度已有了质的提升，那么，新车到底还需不需要磨合呢？答案是：当然要
Before the new car why to run in 1: let the engine, gear gear grinding, in order to achieve the best working conditions; 2: let the brake system fully run in, to achieve the best working conditions; 3: let the owner and new car run in, familiar with vehicle performance, reduce accidents; summing up is the new car running in. It is to eliminate the geometric deviations of parts in the manufacturing process, so that the parts can be more perfectly matched and the best performance can be achieved. Now, the accuracy of automobile manufacturing technology and parts processing has been improved. So, do new cars need to run in anyway? The answer is: of course
1：在100-500公里时,新车磨合期车速不宜过快,一般控制在50-90 km/h之间，有些车型可稍高些，磨合期*高车速可以控制在110km/h以内。2：另外就是控制发动机的转速，一般转速*控制在2000-2500转，千万注意不要让发动机在高,应温和驾驶,新车磨合期时速不超过100公里,转速不超过2500转.3：到前2500-3500公里,水温已达工作
1: at 100-500 km, the speed of the new car should not be too fast in the running in period. The general control is between 50-90 km/h, some cars can be slightly higher, and the maximum speed in the running in period can be controlled within 110km/h. 2: the other is to control the engine speed, the general speed of the best control in the 2000-2500 turn, do not let the engine in high, should be gentle driving, the new car running in period is not more than 100 kilometers, the speed does not exceed 2500.3: to the first 2500-3500 kilometers, the water temperature has reached work
济南陆通汽车是一家集进口国产高端轿车，越野车、城市SUV，诊断 ，维修与保养及配件供应与一体的专业性汽车售后服务中心，本中心拥 有高端车专用检测设备，主营：进口国产 宝马、奔驰、大众、奥迪、 沃尔沃等高端车诊断维修与保养服务(德系专修）。
公司以顾客至上，诚信为本 |
 |
|
|
手机站
您当前位置是：产品大全 >> 汽摩及配件 >>
防护保养品
免责声明：以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，www.qy6.com对此不承担任何责任。如有侵犯您的权益，请来信通知删除。
联系信息
