乐泰 Letter Grade AV (087) 乐泰胶水,电子胶水
技术服务热线:021-51693135 / 021-22818476
乐泰®Letter Grade AV(087)高强度螺纹锁用于在各种应用中锁定和密封大粗螺母,螺栓和螺柱,需要高锁定强度。
固化材料的典型性能
物理性质:热膨胀系数,ISO 11359-2,K-1100×10-6
导热系数ISO 8302,W /(m·K)0.1
比热,kJ /(kg·K)0.3
电气特性:介质击穿强度,IEC 60243-1,kV / mm9.8
固化材料的典型性能
粘合性能22°CPrevail扭矩6小时后,ISO 10964:3/8 x 24钢螺母(2级)和螺栓(2级)N·m 5.7至28.3LMS(lb.in。)(50至250)
存储
将产品存放在未开封的容器中,干燥处。*佳储存温度:8°C至21°C。 低于8°C或高于28°C的储存可能会对产品性能产生不利影响从容器中取出的材料在使用过程中可能会受到污染。 不要将产品返回原来的容器。
乐泰® Letter Grade AV(087) High Strength Threadlockerisused to lock and seal large coarse threaded nuts, bolts and studs in a wide variety of applications, high locking strength is required.
TYPICAL PROPERTIES OF CURED MATERIAL
Physical Properties:Coefficient of Thermal Expansion, ISO 11359-2, K-1100×10-6
Coefficient of Thermal Conductivity, ISO 8302,W/(m·K)0.1
Specific Heat, kJ/(kg·K) 0.3
Electrical Properties:Dielectric Breakdown Strength,IEC 60243-1, kV/mm9.8
TYPICAL PERFORMANCE OF CURED MATERIAL
Adhesive PropertiesAfter 6 hours @ 22 °CPrevail Torque, ISO 10964:3/8 x 24 steel nuts (grade2) and bolts (grade 2)N·m 5.7 to 28.3LMS (lb.in.)(50 to 250)
Storage
Store product in the unopened container in a dry location.Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties Material removed from containers may be contaminated during use. Do not return product to the original container |
|
|
|