TRA-DUCT 916H03乐泰胶水,电子胶水
技术服务热线:021-51693135 / 021-22818476
TRA-DUCT 916H03推荐用于需要高导电性和良好机械性能组合的电子接合和密封应用。这两部分光滑的糊状银填充环氧树脂粘合剂是无溶剂的,不含任何铜,镍或碳添加剂,并且在许多不同和不同的材料如金属,陶瓷,玻璃之间形成强大,耐用的导电和导热键和密封和塑料层压板。 TRA-DUCT 916H03在室温下固化,可用作热熔组件的“冷焊”,其中焊接不切实际。它还可用于电气模块,印刷电路,波导,扁平电缆和高频屏蔽的组装和维修。
固化时间为25°C,25°C或25°C
存储
BIPAX,TRA-PAX和散装包装材料的原始,密封和未开封的容器中,除非在包装上另有规定,否则80°F(27°C)或以下干燥条件下的有效期限是基于。预混合和冷冻材料的有效期基于每个包装上指示的温度或低于每个包装温度的干燥储存条件。内容可能在存储期间分离。在散装容器(例如石英,加仑)中的树脂或固化剂应在混合之前充分混合,以获得设计在配方中的性能的所有益处。
TRA-DUCT 916H03 is recommended for electronic bonding and sealing applications that require the combination of high conductivity coupled with good mechanical properties. This two part smooth paste silver-filled epoxy adhesive is solvent free, does not contain any copper, nickel or carbon additives, and develops strong, durable electrically and thermally conducting bonds and seals between many different and dissimilar materials such as metals, ceramics, glass and plastic laminates. TRA-DUCT 916H03 cures at room temperature, and can be used as a "cold-solder" for heat-sensitive components where hotsoldering is impractical. It can also be used for the assembly and repair of electrical modules, printed circuits, wave guides, flat cable and high frequency shields.
CURE SCHEDULE 2 hours @ 65°C or 24 hours @ 25°C
STORAGE
The expiration date is based upon dry storage conditions at or below 80°F (27°C), unless specified otherwise on the packaging, in the original, sealed and unopened containers for BIPAX, TRA-PAX and bulk packaged materials. The expiration date for pre-mixed and frozen materials is based upon dry storage conditions at or below the temperature indicated on each package. Contents may separate during storage. Resin or hardener in bulk containers (e.g. quarts,gallons) shou |
|
|
|